Important – Read First
The performance of your new system requires a properly installed system. Proper transducer attachment and placement is critical to effective anti-fouling.
- All transducers must be at an elevation below the waterline.
- The provided power cable must be attached to a power distribution panel capable of supplying power when the boat ignition is off, or directly to the battery – similar to how a bilge pump is wired. Just like a bilge pump, the Hull Shield system will always need access to power.
- To validate your warranty, you must register your warranty here: https://crm.ecosonic.co/warranty-registration
HD Systems do not have a serial number. The serial numbers must be included on all HDi, HDY, and HDX systems.
PDF – HD1 Installation and Operation Manual
PDF – HD4 Installation and Operation Manual
More detailed information will be provided soon for the new HDi product line – check back again soon.
If you have an HDY or HDX System, the installation manual is in an online eLearning course. Please email support@hullshield.net to request a copy of the installation manual (after you register for your warranty https://crm.ecosonic.co/warranty-registration). We do not provide HDY/HDX installation instructions unless there is an active warranty registration.